savings

33 Home Improvement Projects You Can DIY To Save Money

You can save thousands on home improvement projects by doing-it-yourself, so why not start? Here's 33 projects you can do that will save you BIG money.

This article is jam-packed with money-saving home improvement projects, and not just a little picture and a quick description, but basic instructions as well as links to resources that will turn you into the next Chip & Joanna.

To make navigation a bit easier for you, I'm including a table of contents so you can skip down to the section(s) that you're most interested in.

Time to save money Savings Hackers!

Upgrading Kitchen Cabinets
Installing a Kitchen Backsplash
Wood Floor Refinishing
Installing a New Sink
Replacing Outdated Light Fixtures
Removing Popcorn Ceilings
Painting Interior Walls
Replacing Windows
Building a Deck or Patio
Building a Fence
Installing a Hot Tub
Installing a Fire Pit
Installing Outdoor Lighting
Installing an Outdoor Fountain
Caulking Windows
Replacing a Toilet
Building a Shed
Installing a Garden Irrigation System
Replacing a Garage Door
Replacing Siding
Installing Energy-Efficient Appliances
Adding Insulation
Bathroom Renovation
Upgrading a Kitchen Countertop
Installing a Home Security System
Replacing a Water Heater
Replacing Electrical Wiring
Installing a New HVAC System
Installing a Ceiling Fan
Installing Solar Panels
Painting The Exterior Of Your Home
Adding a Water Filtration System
Replacing Gutters

Upgrading Kitchen Cabinets

While we’re going to stop short of saying building kitchen cabinets are as easy as painting-by-numbers, we’re also not going to assume that you aren’t handy, or know someone that is. If you can build cabinetry you’re going to be able to save a boatload (dare I say a cabinet load?) of money doing it yourself.

Average Cost Of Professional Kitchen Cabinet Build & Install

In general, because it obviously depends on the size of your kitchen and the type of wood you use, the average cost of kitchen cabinets ranges from $4,000 to $13,000, with an average cost of about $8,000.

Average Cost Of A DIY Kitchen Cabinet Build & Install

On average, DIY kitchen cabinets cost between $600 and $1,500 to build and install.

Savings

$3,400 - $11,500

How To DIY Kitchen Cabinets

Begin by measuring the area where the cabinets will be installed and purchasing the appropriate materials.
Once you have the materials, cut and assemble the cabinet boxes and doors.
Install the cabinet boxes onto the wall and secure them in place.
Attach the doors and drawer fronts to the cabinet boxes.
Install the hinges and hardware.
Apply the finish of your choice.
Install the countertop, if desired.

Kitchen Cabinet Videos & Resources

Installing a Kitchen Backsplash

Average Cost Of A Professional Kitchen Backsplash Installation

The average cost of a professional kitchen backsplash installation is between $800 and $2,000, depending on the type and quality of the materials used, and well...the size of your kitchen. You never know when you need a 15 ft mural ;)

Average Cost Of A DIY Kitchen Backsplash Installation

The average cost of a DIY kitchen backsplash installation is between $100 and $400, depending on the parameters above.

Average Savings

The average savings for a DIY kitchen backsplash installation is between $700 and $1,600.

How To DIY A Kitchen Backsplash

A DIY kitchen backsplash installation is relatively quick and easy, and with some planning, you can install a kitchen backsplash yourself in a single day.

Here’s how:

Begin by measuring the area for the backsplash and purchasing the appropriate material.
Once you have the material, clean the area and make sure it is free of debris.
Apply a thin layer of adhesive to the wall and lay the tiles in place.
Use a notched trowel to ensure an even application of the adhesive.
Place the tiles in the pattern of your choice and use spacers to ensure they are even and straight.
Once the tiles are in place, use a grout float to spread the grout evenly over the tiles.
Allow the grout to dry before wiping away any excess and sealing the grout.

Kitchen Backsplash Video & Article Resources

Wood Floor Refinishing

Average Cost Of Professional Wood Floor Refinishing

The average cost of professional wood floor refinishing is between $2,200 and $6,000. The majority of the cost is in labor, so you'd be eliminating that entirely.

Average Cost Of A DIY Wood Floor Refinishing

The average cost of a DIY wood floor refinishing is between $200 and $1,000.

Average Savings

The average savings for a DIY wood floor refinishing is between $2,000 and $5,000.

How To DIY Wood Floor Refinishing

Begin by sweeping and vacuuming the wood floors to remove any dust and debris.
Use a floor sander to sand the wood floors.
Apply a stain to the wood floors if desired.
Use a buffer to apply a sealant to the wood floors.
Allow the sealant to dry before applying a second coat.
Once the sealant has dried, buff the floors to a shine.

DIY Wood Floor Refinishing Video & Article Resources

Installing a New Sink

Average Cost Of A Professional Sink Installation

The average cost of a professional sink installation is between $200 and $600, and that's if you don't go completely crazy on the cost of a sink!

Average Cost Of A Professional Sink Installation

The average cost of a DIY sink installation is between $50 and $200, which is the price of the sink. Your time is free* (time is never free, btw)

Average Savings

The average savings for a DIY sink installation is between $150 and $400.

How To DIY A Sink Installation

Begin by turning off the water supply to the sink and disconnecting the plumbing.
Remove the old sink and ensure the area is dry and free of debris.
Place the new sink in the area and attach the drain and water supply lines.
Secure the sink to the countertop with adhesive or screws.
Connect the plumbing and turn the water supply back on.
Test the sink for leaks.

DIY Sink Installation Video & Article Resources

Replacing Outdated Light Fixtures

Average Cost Of A Profession Light Fixture Installation

The average cost of a professional light fixture installation is between $100 and $400, and the light fixtures themselves can run the gamut on pricing.

Average Cost Of A DIY Light Fixture Installation

The average cost of a DIY light fixture installation is between $50 and $200 if you're buying in the mid-to-low range.

Average Savings

The average savings for a DIY light fixture installation is between $50 and $200.

How To DIY Light Fixture Installation

Begin by turning off the power to the area and removing the old light fixture.
Once the old fixture is removed, ensure the area is dry and free of debris.
Attach the new fixture to the wall or ceiling.
Install the new lightbulbs and connect the wiring.
Turn the power back on and test the new fixture.

DIY Light Fixture Installation Video & Article Resources

Removing Popcorn Ceilings

Average Cost Of Professional Popcorn Ceiling Removal

The average cost of professional popcorn ceiling removal is between $1,000 and $2,500.

Average Cost Of A DIY Popcorn Ceiling Removal

The average cost of a DIY popcorn ceiling removal is between $50 and $300. The more supplies (scraper, white paint, drop cloths, ladder) you have on hand, the cheaper it is, as the majority of the cost is in labor when paying a professional.

Average Savings

The average savings for a DIY popcorn ceiling removal is between $950 and $2,200.

How To DIY Popcorn Ceiling Removal

Begin by turning off the power to the area and covering the furniture and floors with a drop cloth.
Use a spray bottle to dampen the popcorn ceiling.
Use a putty knife to scrape off the popcorn texture.
Vacuum up the debris and check for any remaining texture.
Finally, apply a new texture or paint to the ceiling.

DIY Popcorn Ceiling Removal Video & Article Resources

Painting Interior Walls

Average Cost Of Professional Interior Wall Painting

The average cost of professional interior wall painting is between $500 and $1,500, not including the cost of paint.

Average Cost Of A DIY Interior Wall Painting

The average cost of a DIY interior wall painting is between $50 and $200, including the cost of paint and assuming you're not painting the Sistine Chapel.

Average Savings

The average savings for a DIY interior wall painting is between $450 and $1,300.

How To DIY Interior Wall Painting

Begin by cleaning the walls and filling in any holes or cracks.
Use painter’s tape to "tape off" any trim or baseboards.
Apply a primer to the walls to ensure an even coat of paint.
Apply the paint in even strokes, working in small sections.
Allow the paint to dry before applying a second coat.
Finally, remove the painter’s tape.

DIY Interior Wall Painting Video & Article Resources

Replacing Windows

Average Cost Of A Profession Window Installation

The average cost of a professional window installation is between $400 and $1,200, not including window costs and assuming installation of 1 to 4 windows ($300/window cost)

Unfortunately, complicated installs can dramatically increase costs, so bear that in mind. There are instances where an install can cost more than $2,000!

Average Cost Of A DIY Window Installation

The average cost of a DIY window installation is essentially free, minus the cost of the windows. The average cost of a window is about $700 and can vary up and down by almost 80%, depending on the style.

Average Savings

The average savings for a DIY window installation is between $300 and $700.

How To DIY Window Installation

Begin by removing the old window, ensuring the area is dry and free of debris.
Prepare the window opening by adding insulation and covering with a window wrap.
Place the new window in the opening and secure it with screws.
Attach the trim around the window and seal with caulk.
Test the window for any air leaks.
Enjoy your new window!

DIY Window Installation Video & Article Resources

Building a Deck or Patio

Average Cost Of A Profession Deck or Patio Build

The average cost of a professional deck or patio installation is between $2,000 and $10,000, which is almost a lowball if you really think about it post-COVID. The average price of a deck is $21/sq ft, but they can go as high as $50/sq ft.

Average Cost Of A DIY Deck or Patio Build

The average cost of a DIY deck or patio installation is between $500 and $2,500, however, as seen above, costs can vary wildly. You can safely estimate that DIY savings would be in the 70% range regardless of your wood and quantity vs. professional install.

Average Savings

The average savings for a DIY deck or patio installation is between $1,500 and $7,500.

If you had a $10,000 budget, you could save $7k right off the top doing it yourself and then you can allocate more of that budget towards higher quality decking materials, or, hey, even a $6,000 BBQ grill!

Mont Alpi MAi400-DFC 32-Inch 4-Burner 78000 BTU Deluxe Stainless Steel Gas Outdoor Kitchen Bar Barbecue Island Grill w/ Infrared Side Burner + Wine Cooler Compact Refrigerator + Rotisserie Kit

The 400 Deluxe Island Grill features as its centerpiece a 30-inch, 78,000 BTU Propane Gas Grill. The lid is double lined for superb heat retention and has a temperature gauge on front. The main cooking area measures 30 x 18 inches, and consists of 8mm stainless steel cooking grids. A stainless steel warming rack is also standard. Beneath the cooking surface are 4 double layered stainless steel Heatwave flame tamers that provide even heat distribution and protect the 4 tubular stainless steel high-efficiency 12,000 BTU burners that sit below them. In the rear of the grill is a ceramic infrared burner for the included heavy duty rotisserie kit. The interior of the grill is lit by dual halogen lights, perfect for cooking after dark.

Buy!

How To DIY A Deck or Patio Build

Begin by preparing the area by removing any existing vegetation and leveling the ground.
Use stakes and string to mark out the area for the deck or patio.
Dig out the area for the footings and pour the concrete.
Install the decking or patio stones.
Install the railing and stairs if necessary.
Finally, add any additional features such as benches, planters, and lighting.

DIY Deck or Patio Build Video & Article Resources

Building a Fence

Average Cost Of A Profession Fence Build & Installation

The average cost of a professional fence build and installation is between $1,500 and $4,000, and the national average as of 2022 was $3,000.

Average Cost Of A DIY Fence Build & Installation

For a basic fence the average cost of building and installation is between $300 and $1,200. Materials are definitely a factor!

Average Savings

The average savings for a DIY fence build and installation is between $1,200 and $2,800.

How To DIY A Fence Build & Installation

Begin by measuring the area for the fence and purchasing the necessary materials.
Dig the post holes and pour the concrete.
Attach the posts to the concrete footings.
Attach the panels or boards to the posts.
Add any additional features such as gates, trellis, or lattice.
Finally, caulk any gaps and seal the wood.

DIY Fence Build & Installation Video & Article Resources

Installing a Hot Tub

Average Cost Of A Professional Hot Tub Installation

The average cost of a professional hot tub installation is between $1,000 and $5,000. Even Angi says that $650 - $6,000 for labor alone is typical. Ouch!

Considering tubs can go up to $35,000, and depending on how wild the install is (maybe you're trying to put it in a treehouse?) you could be dropping $40k+ on a professional install + hot tub.

Average Cost Of A DIY Hot Tub Installation

The average cost of a DIY hot tub installation is between $200 and $1,000, plus you need to purchase the tub, which can vary in price like cars and houses. It all depends on what you want!

Examples:
- $5k on Amazon
- $10k at Sam's Club

Average Savings

The average savings for a DIY hot tub installation is between $800 and $4,000.

How To DIY Hot Tub Installation

Begin by selecting the spot for the hot tub and preparing the area by leveling the ground.
Place the hot tub in the area and secure it with screws.
Connect the hot tub to the electrical outlet and test the power.
Install the hot tub pluming and connect it to the water supply.
Add the chemicals to the water and test the temperature.

DIY Hot Tub Installation Video & Article Resources

Installing a Fire Pit

Average Cost Of A Profession Fire Pit Installation

The average cost of a professional fire pit installation is between $500 and $2,000. The majority of the cost is in the labor, not the materials.

My wife built one in our backyard for only a few hundred dollars. Oh, and she put in a water feature with a recirculating pump, too! So, if my cheapskate wife can build an entire backyard oasis for under $1k, then I guarantee you can get a fire pit for a couple hundred dollars and a little raking.

Average Cost Of A DIY Fire Pit Installation

The average cost of a DIY fire pit installation is between $50 and $300, depending on the type and quality of materials used.

Average Savings

The average savings for a DIY fire pit installation is between $450 and $1,700.

How To DIY Fire Pit Installation

Begin by selecting the spot for the fire pit and preparing the area by clearing away any vegetation and leveling the ground.
Place the fire pit in the area and secure it with screws.
Dig a trench and line it with fire-resistant material.
Place the fire pit in the trench and fill in the area with gravel.
Test the fire pit for any air leaks.
Finally, enjoy your new fire pit!

DIY Fire Pit Installation Video & Article Resources

Installing Outdoor Lighting

Average Cost Of A Profession Outdoor Lighting Installation

The average cost of a professional outdoor lighting installation is between $500 and $2,000, depending on the type of lighting and the complexity of the job.

String lights (as seen above) are cheap and simple.

Lighting installation on solid objects, or installing lamp posts, totally different story.

Average Cost Of A DIY Outdoor Lighting Installation

The average cost of a DIY outdoor lighting installation is between $50 and $200, sometimes this includes the total cost of the lighting.

Average Savings

The average savings for a DIY outdoor lighting installation is between $450 and $1,800.

How To DIY Outdoor Lighting Installation

Begin by selecting the spot for the lighting and preparing the area by clearing away any vegetation.
Place the lighting in the area and secure it with screws.
Connect the lighting to the electrical outlet and test the power.
Install the lighting fixtures and connect the wiring.
Test the lighting to ensure it is working properly.

DIY Outdoor Lighting Installation Video & Article Resources

Installing an Outdoor Fountain

Average Cost Of A Profession Outdoor Fountain Installation

The average cost of a professional outdoor fountain installation is between $500 and $2,000, or in the case above, with a grand palace-like fountain, you could be looking at upwards of $100k. It all depends, right?

For basic fountains, or used fountains (even better!) the install is going to come down to how easy it is to get the fountain in place and tap into the water supply.

Average Cost Of A DIY Outdoor Fountain Installation

The average cost of a DIY outdoor fountain installation is between $50 and $200, depending on the type and quality of materials used.

As said above, the cost is in the fountain. If you can score a cheap fountain, it's now just a matter of hauling it, placing it and tapping into the water.

Average Savings

The average savings for a DIY outdoor fountain installation is between $450 and $1,800.

How To DIY Outdoor Fountain Installation

Begin by selecting the spot for the fountain and preparing the area by clearing away any vegetation.
Place the fountain in the area and secure it with screws.
Connect the fountain to the water supply and test the flow.
Install the fountain pump and connect the wiring.
Test the fountain to ensure it is working properly.

DIY Outdoor Fountain Installation Video & Article Resources

Caulking Windows

Average Cost Of A Profession Caulking Windows

The average cost of a professional window caulking job is between $500 and $1,500. The more (and larger) windows you have, the more expensive this job gets.

For those with just a few windows to caulk, it's definitely a DIY job.

Average Cost Of A DIY Caulking Windows

The average cost of a DIY window caulking job is between $28 and $200. Caulk is cheap, it only takes a little time.

You can do this with...

1.) This cheap waterproof caulk ($10)
2.) This cheap caulking gun ($12)
3.) This cheap caulking tool/scraper/applicator ($6)

For small jobs you're looking at $28 total cost.

Average Savings

The average savings for a DIY window caulking job is between $450 and $1,300.

How To DIY Caulking Windows

Begin by preparing the area by cleaning the window frames and checking for any cracks or holes.
Apply the caulk to the window frames and smooth out any excess.
Allow the caulk to cure for the recommended time.
Test the windows for any air leaks.

DIY Caulking Windows Video & Article Resources

Replacing a Toilet

Average Cost Of A Profession Toilet Installation

The average cost of a professional toilet installation is between $500 and $1,500. This is before the cost of the toilet.

Average Cost Of A DIY Toilet Installation

The average cost of a DIY toilet installation is between $50 and $200 and you'll want to make sure that you have the capabilities to do a job like this as amateur plumbing can be costly if done incorrectly!

Average Savings

The average savings for a DIY toilet installation is between $450 and $1,300.

How To DIY A Toilet Installation

Begin by turning off the water supply and draining the tank.
Disconnect the water supply line and remove the old toilet.
Install the new toilet on the floor and attach the water supply line.
Tighten the nuts and bolts on the toilet.
Test the toilet for any leaks.

DIY Installation Video & Article Resources

Building a Shed

Average Cost Of A Profession Shed Build & Installation

The average cost of a professional shed build and installation is between $2,000 and $10,000, but don't let that fool you, sheds can get extremely expensive! It all depends on the materials, size & features you want. You can even buy them pre-made.

Average Cost Of A DIY Shed Build & Installation

The average cost of a DIY shed build and installation is between $200 and $1,000. This is definitely one of those instances where "what you want" determines the total cost. While labor is easily 80% of the overall cost, maybe even 90%, you absolutely should have some level of carpentry skills and tools.

If you're down for the hard work there's a shed load of savings in this one (sorry, that was bad)

Average Savings

The average savings for a DIY shed build and installation is between $1,800 and $9,000.

How To DIY A Shed Build & Installation

Begin by selecting the spot for the shed and preparing the area by leveling the ground.
Build the shed frame and secure it with screws.
Cover the frame with the siding of your choice.
Install the doors, windows, and other features.
Secure the shed to the ground with screws.

DIY Shed Build & Installation Video & Article Resources

Installing a Garden Irrigation System

Average Cost Of A Profession Garden Irrigation System Installation

The average cost of a professional garden irrigation system installation is between $500 and $2,500.

Average Cost Of A DIY Garden Irrigation System Installation

The average cost of a DIY garden irrigation system installation is between $50 and $300.

As you might have guessed, my wife has installed 2 of these herself (front and back) and while it's way over my head, her father is a contractor and she grew up building, so she knew exactly what type of hosing to purchase and all of the little attachments and valves. She even has it set to a timer!

Now, I say all of that because it's definitely possible, it doesn't take much money ($100 - $150) or time (2 hours max), but you do need to have good directions if you don't already know what to do. Thankfully, we have YouTube!

Average Savings

The average savings for a DIY garden irrigation system installation is between $450 and $2,200.

How To DIY A Garden Irrigation System Installation

Begin by selecting the spot for the irrigation system and preparing the area by clearing away any vegetation.
Install the irrigation system valves and connect the pipes.
Connect the irrigation system to the water supply and test the flow.
Install the sprinklers and connect the wiring.
Test the irrigation system to ensure it is working properly.

DIY Garden Irrigation System Installation Video & Article Resources

Replacing a Garage Door

Average Cost Of A Profession Garage Door Installation

The average cost of a professional garage door installation is between $500 and $2,000, NOT including the door.

Average Cost Of A DIY Garage Door Installation

The average cost of a DIY garage door installation is between $50 and $200, not including the door.

This is less of a "tough" job and more of a 2 person+ job if you have a standard 2-car garage door. While this might be better left to professionals, there's a substantial savings if you can do it yourself.

Average Savings

The average savings for a DIY garage door installation is between $450 and $1,800.

How To DIY A Garage Door Installation

Begin by disconnecting the power to the garage door opener.
Remove the old garage door and frame.
Install the new garage door and frame.
Connect the garage door opener and test the power.
Test the garage door to ensure it is working properly.

DIY Garage Door Installation Video & Article Resources

Replacing Siding

Average Cost Of A Profession Siding Installation

The average cost of a professional siding installation is between $2,000 and $10,000.

Average Cost Of A DIY Siding Installation

The average cost of a DIY siding installation is between $200 and $1,000, depending on the type and quality of materials used.

Much like plumping (or roofing), this job is probably best left to professionals if you don't have previous experience, or the weather is a little spotty.

You have demo, install (requires a mitre saw in many cases) main, corner & trim, plus caulking and painting to do.

Definitely doable. Even for amateurs, and the savings are massive, you just absolutely need to make sure you do it right as siding is your houses "shield" against weather and insects.

Average Savings

The average savings for a DIY siding installation is between $1,800 and $9,000.

How To DIY A Siding Installation

Begin by removing the old siding and cleaning the area.
Install the new siding and secure it with nails.
Install the corner pieces and trim pieces.
Caulk any gaps between the siding and trim pieces.
Paint the siding as desired.

DIY Siding Installation Video & Article Resources

Installing Energy-Efficient Appliances

Average Cost Of A Profession Energy-Efficient Appliance Installation

The average cost of a professional energy-efficient appliance installation is between $500 and $2,500. This doesn't include the cost of your $5,000 stainless steel side-by-side refrigerator/freezer, just saying!

Average Cost Of A DIY Energy-Efficient Appliance Installation

The average cost of a DIY energy-efficient appliance installation is between $50 and $200, and really, it's about as simple as hooking up a washing machine (because, sometimes it IS a washing machine!).

The difficult part is that it's not really a solo job and getting the appliances up stairs, or through doorways. Dolly's are ideal. Weight belts can be helpful. 2 people or more is ideal for the moving & positioning portion.

Average Savings

The average savings for a DIY energy-efficient appliance installation is between $450 and $2,200.

How To DIY An Energy-Efficient Appliance Installation

Begin by disconnecting the power to the appliance.
Remove the old appliance and disconnect any necessary wiring.
Install the new energy-efficient appliance and connect the wiring.
Connect the appliance to the power supply and test the power.
Test the appliance to ensure it is working properly.

DIY Energy-Efficient Appliance Installation Video & Article Resources

Adding Insulation

Average Cost Of A Profession Insulation Installation

The average cost of a professional insulation installation is between $500 and $2,500.

Average Cost Of A DIY Insulation Installation

The average cost of a DIY insulation installation is between $50 and $200.

Average Savings

The average savings for a DIY insulation installation is between $450 and $2,200.

How To DIY An Insulation Installation

Begin by selecting the type of insulation and measuring the area to be insulated.
Cut the insulation to the correct size.
Install the insulation in the walls, ceiling, and floors.
Caulk and seal any gaps between the insulation and the walls.
Paint the insulation to match the walls.

DIY Insulation Installation Video & Article Resources

Bathroom Renovation

Average Cost Of A Professional Bathroom Renovation

The average cost of a professional bathroom renovation is between $5,000 and $15,000.

Average Cost Of A DIY Bathroom Renovation

The average cost of a DIY bathroom renovation is between $500 and $2,500.

Average Savings

The average savings for a DIY bathroom renovation is between $4,500 and $12,500.

How To DIY A Bathroom Renovation

Begin by removing the old fixtures and disposing of them appropriately.
Install the new fixtures, including the sink, toilet, shower, and tub.
Install the new tiles, flooring, and paint.
Connect the plumbing and test the water flow.
Test the fixtures to ensure they are working properly.

DIY Bathroom Renovation Video & Article Resources

Upgrading a Kitchen Countertop

Average Cost Of A Professional Kitchen Countertop Installation

The average cost of a professional kitchen countertop installation is between $2,000 and $4,000.

Average Cost Of A DIY Kitchen Countertop Installation

The average cost of a DIY kitchen countertop installation is between $200 and $1,000.

Average Savings

The average savings for a DIY kitchen countertop installation is between $1,800 and $3,000.

How To DIY A Kitchen Countertop Installation

Begin by measuring the area for the countertop.
Cut the countertop to the correct size.
Install the countertop and secure it with brackets.
Caulk and seal any gaps between the countertop and the walls.
Paint the countertop as desired.

DIY Kitchen Countertop Installation Video & Article Resources

Installing a Home Security System

Average Cost Of A Professional Home Security System Installation

The average cost of a professional home security system installation is between $1,000 and $3,000.

Average Cost Of A DIY Home Security System Installation

The average cost of a DIY home security system installation is between $200 and $1,000.

Average Savings

The average savings for a DIY home security system installation is between $800 and $2,000.

How To DIY A Home Security System Installation

Begin by selecting and purchasing the home security system.
Install the sensors and other components as necessary.
Connect the home security system to the power supply and test the power.
Connect the system to the internet and test the connection.
Test the system to ensure it is working properly.

DIY Home Security System Installation Video & Article Resources

Replacing a Water Heater

Average Cost Of A Professional Water Heater Installation

The average cost of a professional water heater installation is between $500 and $2,500.

Average Cost Of A DIY Water Heater Installation

The average cost of a DIY water heater installation is between $50 and $200.

Average Savings

The average savings for a DIY water heater installation is between $450 and $2,200.

How To DIY A Water Heater Installation

Begin by disconnecting the power to the water heater.
Remove the old water heater and disconnect any necessary wiring.
Install the new water heater and connect the wiring.
Connect the water heater to the power supply and test the power.
Test the water heater to ensure it is working properly.

DIY Water Heater Installation Video & Article Resources

Replacing Electrical Wiring

Average Cost Of A Professional Electrical Wiring Installation

The average cost of a professional electrical wiring installation is between $500 and $2,500.

NOTE: While the cost savings can be substantial, this may be a job best left to a professional electrician.

Average Cost Of A DIY Electrical Wiring Installation

The average cost of a DIY electrical wiring installation is between $50 and $200, depending on the type and quality of materials used.

Average Savings

The average savings for a DIY electrical wiring installation is between $450 and $2,200.

How To DIY An Electrical Wiring Installation

Begin by removing the old wiring and disposing of it appropriately.
Install the new wiring and secure it with wire nuts.
Connect the new wiring to the power supply and test the power.
Caulk and seal any gaps between the wiring and the walls.
Test the wiring to ensure it is working properly.

DIY Electrical Wiring Installation Video & Article Resources

Installing a New HVAC System

Average Cost Of A Professional HVAC System Installation

The average cost of a professional HVAC system installation is between $3,000 and $7,000.

Average Cost Of A DIY HVAC System Installation

The average cost of a DIY HVAC system installation is between $200 and $1,000.

Average Savings

The average savings for a DIY HVAC system installation is between $2,800 and $6,000.

How To DIY An HVAC System Installation

Begin by selecting and purchasing the HVAC system.
Install the components and secure them with brackets.
Connect the HVAC system to the power supply and test the power.
Connect the system to the internet and test the connection.
Test the system to ensure it is working properly.

DIY HVAC System Installation Video & Article Resources

Installing a Ceiling Fan

Average Cost Of A Professional Ceiling Fan Installation

The average cost of a professional ceiling fan installation is between $100 and $500.

Average Cost Of A DIY Ceiling Fan Installation

The average cost of a DIY ceiling fan installation is between $30 and $100.

Average Savings

The average savings for a DIY ceiling fan installation is between $70 and $400.

How To DIY A Ceiling Fan Installation

Begin by turning off the power to the fan.
Remove the old fan and disconnect any necessary wiring.
Install the new fan and secure it to the ceiling.
Connect the fan to the power supply and test the power.
Test the fan to ensure it is working properly.

DIY Ceiling Fan Installation Video & Article Resources

Installing Solar Panels

Average Cost Of A Professional Solar Panel Installation

The average cost of a professional solar panel installation is between $10,000 and $20,000.

Average Cost Of A DIY Solar Panel Installation

The average cost of a DIY solar panel installation is between $2,000 and $10,000.

Average Savings

The average savings for a DIY solar panel installation is between $8,000 and $18,000.

How To DIY A Solar Panel Installation

Begin by selecting and purchasing the solar panels.
Install the solar panels and secure them to the roof.
Connect the solar panels to the power supply and test the power.
Connect the system to the internet and test the connection.
Test the system to ensure it is working properly.

DIY Solar Panel Installation Video & Article Resources

Painting The Exterior Of Your Home

Average Cost Of A Professional Exterior Home Painting

The average cost of a professional exterior home painting is between $2,000 and $4,000.

Average Cost Of A DIY Exterior Home Painting

The average cost of a DIY exterior home painting is between $200 and $1,000.

Average Savings

The average savings for a DIY exterior home painting is between $1,800 and $3,000.

How To DIY An Exterior Home Painting

Begin by cleaning and prepping the exterior of the home.
Select and purchase the paint and painting supplies.
Paint the exterior of the home and allow to dry.
Apply a second coat and allow to dry.
Inspect the exterior of the home to ensure it is painted properly.

DIY Exterior Home Painting Video & Article Resources

Adding a Water Filtration System

Average Cost Of A Professional Water Filtration Installation

The average cost of a professional water filtration installation is between $500 and $2,500.

Average Cost Of A DIY Water Filtration Installation

The average cost of a DIY water filtration installation is between $50 and $200.

Average Savings

The average savings for a DIY water filtration installation is between $450 and $2,200.

How To DIY A Water Filtration Installation

Begin by selecting and purchasing the water filtration system.
Install the system and secure it to the wall.
Connect the system to the water supply and test the water.
Connect the system to the power supply and test the power.
Test the system to ensure it is working properly.

DIY Water Filtration Installation Video & Article Resources

Replacing Gutters

Average Cost Of A Professional Gutter Installation

The average cost of a professional gutter installation is between $1,000 and $2,000.

Average Cost Of A DIY Gutter Installation

The average cost of a DIY gutter installation is between $100 and $500.

Average Savings

The average savings for a DIY gutter installation is between $900 and $1,500.

How To DIY A Gutter Installation

Begin by selecting and purchasing the gutters.
Install the gutters and secure them to the roof.
Connect the gutters to the drainage system and test the flow.
Connect the gutters to the power supply and test the power.
Test the gutters to ensure they are working properly.